loading
reading
writing
saving
searching
Structural Tube Steel, Channel, Flat Bar, Pipe and Angle Iron - $25 (Superior)
QR Code Link to This Post
NO EMAILS!!!
New left over structural Channel, Tube Steel, Flat Bar and Angle, some light rust from covered storage.
All at about 75 cents a pound.
I have listed the longer lengths, I do not have anything longer, so no need to ask.
Other sizes in short lengths, you would just have to come out and look to see if there is something you need.
2x3x.120" Rectangular Tubing, 3.8lbs/ft, 4'-3". $12 each, I have 9 available.
5x5x1/4 Square Tubing 16ft columns with base plates. >> See Pic<< 2 columns 16ft high with 1-1/2" thick base plates, 9"x17" welded on them.
These are new, painted black but never installed. Use them for a gantry crane, columns or whatever. 670lbs total. $500 for both.
5x5x1/4 Square Tubing, 15.6lbs/ft, 1 at 7'-5", $85
6x6x1/4 Square Tubing, 19.0lbs/ft, 10'-2". $145 each, I have 2 available.
6x6x1/4 Square Tubing, 19.0lbs/ft, 1 at 7'-3". $105
2x2x1/8 Angle Iron, 1.65 lbs/ft, 20'-0", $25 each, I have 40 available
2.5x2.5x3/16 Angle Iron, 3.07 lbs/ft, 10'-0"", $23 each, I have 14 available
3x3x3/16 Angle Iron, 3.71lbs/ft, 14'-1", $39
3x3x3/16 Angle Iron, 3.71lbs/ft, 13'-7", $38, I have 2 available
3x3x1/4 Angle Iron, 4.91lbs/ft, at16'-7", $61 each. I have 2 available
4x4x1/4 Angle Iron, 6.6lbs/ft, Four pieces, vary from 4'-0" to 4'-9", all 75 cents/lb
4x4x1/4 Angle Iron, 6.6lbs/ft, 19'-2", $95
4x4x1/4 Angle Iron, 6.6lbs/ft, 14'-3". Two pieces, 94lbs, $70 each
1-1/4" Schedule 40 black pipe, 2.3 lbs/ft, at 48", some a bit shorter, some a bit longer", 4 at $7 each.
2-1/2" Schedule 40 black pipe, 5.8 lbs/ft, Three at 10'-6", $45 each.
3" Schedule 40 black pipe, 9.1 lbs/ft, Two at 5'-0", $34 each.
4" Schedule 40 black pipe, 10.8 lbs/ft, Three at 7'-0", $57 each.
4" Schedule 40 black pipe, 10.8 lbs/ft, One at 6'-0", $49 each.
8" Schedule 40 black pipe, 28.6 lbs/ft, Two at 8'-0", $175 each.
1x5 solid HR Rectangular Flat Bar, 17.0 lbs/ft, at 10'-0", I have 4 available $128 each.
1x6 solid HR Rectangular Flat Bar, 20.4 lbs/ft, at 6'-0", I have 2 available $92 each.
1x8 solid HR Rectangular Flat Bar, 27.2lbs/ft, at 44", I have 4 available $75 each.
1x10 solid HR Rectangular Flat Bar, 34lbs/ft, at 10-0", I have 4 available $255 each.
3/4x1-1/2 solid HR Rectangular Flat Bar, 3.83 lbs/ft, two at 10'-0", $29 each.
3/4x3 solid HR Rectangular Flat Bar, 7.65 lbs/ft, at 10'-0", $58 each.
3/4x3-1/2 solid HR Rectangular Flat Bar, 8.93 lbs/ft, at 9'-11", $67 each. I have 11.
3/4x9 (yes 9" is an odd size) solid HR Rectangular Flat Bar, 23.0 lbs/ft, four at 13'-1", $225 each.
5/8x8 solid Cold Rolled Rectangular Flat Bar, 17.00 lbs/ft, at 7'-9.5", I have 1 available $100 each.
5/8x6 solid HR Rectangular Flat Bar, 12.75 lbs/ft, at 10'-0", I have 3 available $95 each.
15/16" Diameter Cold Rolled Round bar 2.38lb/ft, three at 10'-0" at $1/lb $24 each
1-15/16" Diameter Cold Rolled Round bar 10.02lb/ft, one at 10'-0" at $1/lb $100 each
NO TEXTS!!
NO EMAILS!!!
^ Either will not be responded to and will be blocked.
Call 4oh6 3oh4 seventyfive sixty.